All Activity
-
When we set out cruising in 2008, we got one of those. They work as advertised, and cost <$100. However, it just didn't fit how we did... -
Although the lights in many of the surrounding boats in the marina dimmed to a mere flicker with the power draw of the Igloo Ice Maker...
-
Ccolemj replied to the thread ICE MAKER what a joy..They use ~100W, which is hardly anything. Mark
-
Ccolemj replied to the thread ICE MAKER what a joy..When we set out cruising in 2008, we got one of those. They work as advertised, and cost <$100. However, it just didn't fit how we did...
-
Ralph Johnstone replied to the thread ICE MAKER what a joy..Although the lights in many of the surrounding boats in the marina dimmed to a mere flicker with the power draw of the Igloo Ice Maker... -
Last weekend, I participated in a Rendezvous with the PacificNW Catalina sailors. The site, Roche Harbor Resort, is magical. While other...
-
-
JoeWhite reacted to jssailem's post in the thread Swap Airmar Depth Transducer and STW Transducer with
Like.
Those are not that far apart. Yes, there is some difference when the transmission is at an angle rather than vertically down, which can... -
jssailem reacted to rgranger's post in the thread What is De-Waxer actually for? And what is it NOT for? with
Helpful.
... that you will be wanting one of these if you use it... Available at Lowes and Home Depot. -
My boat was setup like this when I got it. It's made engine work a dream. Great upgrade.
-
yes, I thought of the Jack, it is already in place. The thing I didn’t think about was the through bolt holding it to the steering...
-
jssailem reacted to Timm R Oday25's post in the thread Replacing a mast…and going taller? with Like.
So now to yet another viewpoint . While welding is definitely a viable option . Depending on the cost of the mast and transportation...
-
I have sent a few emails to Direct-Sails, and so far Richard said he was going to talk to the designer. It has been near 3 weeks and no...
-
shemandr reacted to Ralph Johnstone's post in the thread Hunter 29.5 tinted window replacements with Like.
If you can't get one off the shelf, you'll have to have one fabricated for you. The measurements you require for a good fit wouldn't... -
jssailem replied to the thread Swap Airmar Depth Transducer and STW Transducer.Those are not that far apart. Yes, there is some difference when the transmission is at an angle rather than vertically down, which can...
-
-
JoeWhite reacted to dlochner's post in the thread Swap Airmar Depth Transducer and STW Transducer with Like.
If the transducers are the same diameter it should be an easy swap. Transducer locations, either depth or speed, are always a...
