All Activity
-
Often "enter"tainment systems were dealer installed options that were connected to breakers installed at the factory which MAY or MAY... -
jssailem replied to the thread Easylock Rope Clutch handle replace.I understand the "Hope" element of your statement. Looking at the image you posted, I am doubtful about your success. Yes, it is crazy... -
jssailem replied to the thread Connection of Main Sheet to Sole attachment point.@Dave0963 Is this what your cockpit looks like? I am a bit uncertain. You are looking for a way "to attach the cleat-end of the Main...
-
-
finefurn reacted to Hunter Enthusiast's post in the thread 1984 Hunter 27 - Original Bow-Cap with
Like.
I made the post for a three reasons: 1) I REALLY like that stainlees steel bow-cap (and agree, it adds nothing for structural strength)... -
BigEasy reacted to Ralph Johnstone's post in the thread Hunter 29.5 tinted window replacements with Like.
If you can't get one off the shelf, you'll have to have one fabricated for you. The measurements you require for a good fit wouldn't... -
Not necessarily. Keep thinking good thoughts. It is not good that the engine overheated. What you need to do is to assess what has...
-
That is the pipe-hose adapter I use. There is nothing wrong with PVC/ABS pipe on a boat, and it is a much better choice than hose for...
-
Good morning, Fred. While you can choose to use rigid plastic pipe on your boat for sanitation purposes, there are several reasons why...
-
jssailem replied to the thread Easylock Rope Clutch handle replace.Looking up the clutch online, it appears RigRite has what you need. https://www.rigrite.com/Hardware/Rope_Clutches/Easylock_Stoppers.php...
-
-
Nice! Thats exactly what i was thinking.
-
jssailem replied to the thread Replacing a mast…and going taller?.I agree with the "Weld the Cracks" suggestions. A new mast is not needed for those cracks. Further use in the current condition will...
-
jssailem reacted to Will Gilmore's post in the thread Replacing a mast…and going taller? with
Helpful.
Those cracks are mostly a concern during mast raising. When set, the forces are primarily downward on those cracks. Weld and... -
I was faced with running my cables from the mast to the electrical panel. The original wires were somewhere in the compression post... -
Often "enter"tainment systems were dealer installed options that were connected to breakers installed at the factory which MAY or MAY...
-
jssailem replied to the thread Overheated universal m25.Not necessarily. Keep thinking good thoughts. It is not good that the engine overheated. What you need to do is to assess what has...
