All Activity
-
jssailem replied to the thread Easylock Rope Clutch handle replace.Looking up the clutch online, it appears RigRite has what you need. https://www.rigrite.com/Hardware/Rope_Clutches/Easylock_Stoppers.php... -
-
Nice! Thats exactly what i was thinking.
-
jssailem replied to the thread Replacing a mast…and going taller?.I agree with the "Weld the Cracks" suggestions. A new mast is not needed for those cracks. Further use in the current condition will...
-
jssailem reacted to Will Gilmore's post in the thread Replacing a mast…and going taller? with
Helpful.
Those cracks are mostly a concern during mast raising. When set, the forces are primarily downward on those cracks. Weld and... -
I was faced with running my cables from the mast to the electrical panel. The original wires were somewhere in the compression post... -
Often "enter"tainment systems were dealer installed options that were connected to breakers installed at the factory which MAY or MAY...
-
jssailem replied to the thread Overheated universal m25.Not necessarily. Keep thinking good thoughts. It is not good that the engine overheated. What you need to do is to assess what has...
-
AArt12050 reacted to Ralph Johnstone's post in the thread Hunter 29.5 tinted window replacements with
Like.
If you can't get one off the shelf, you'll have to have one fabricated for you. The measurements you require for a good fit wouldn't... -
jssailem replied to the thread Electrical panel rebuild.I was faced with running my cables from the mast to the electrical panel. The original wires were somewhere in the compression post...
-
-
AaronD replied to the thread Help with mast raising system.An A-frame will generally be more stable, but the C-22 mast is light. We've used a gin pole (with a brake winch) on our C-22 for years... -
I was going to do something similar when i install my solar panels. The wiring will need to run along the teak walls, so i was going to...
-
Ralph Johnstone replied to the thread Hunter 29.5 tinted window replacements.If you can't get one off the shelf, you'll have to have one fabricated for you. The measurements you require for a good fit wouldn't... -
Ha! Project creep aboard has been the single largest financial expense in my life. There are some projects that desperately need to be...
-
fred1diver replied to the thread Electrical panel rebuild.I was thinking about making a simple box panel that goes under the “ceiling” under the electrical panel, simple ¼” plywood and a cleat...
-
jssailem reacted to JoeWhite's post in the thread Sizing of exhaust lines and water lift mufflers with Like.
I would remove ABS drain pipe and install exhaust hose made for this purpose. I do not believe the size of it is important as long as it...
