All Activity
-
jssailem reacted to Stu Jackson's post in the thread Sizing of exhaust lines and water lift mufflers with
Helpful.
You do not have a unique engine. Call the manufacturers of those mufflers, tell them the lengths between the engine, muffler and... -
jssailem replied to the thread H34 Engine angle iron replacement.Nice workmanship @HelloOutThere . Depending on your usage and the performance of your engine, a consideration might have been to...
-
I have a porter cable chordless shop vac... and absolutely LOVE it. I am surprised at how often I use it. There are other...
-
jssailem replied to the thread Electrical panel rebuild.Wire hiding is a challenge. Especially when you try to minimize the voltage drop on the wires. I am still in a quandary about some of...
-
fred1diver replied to the thread Electrical panel rebuild.I wish I could say I am done, but still a long way to go to accomplish what I want, I am still trying to find a way to completely hide... -
-
I've been using Presolve Orange Degreaser (Amazon link). It works really well with grease and oil.
-
I have a porter cable chordless shop vac... and absolutely LOVE it. I am surprised at how often I use it. There are other...
-
HHelloOutThere replied to the thread H34 Engine angle iron replacement.I removed the starboard stringer last fall and milled a new stringer. The original stringer is raw angle iron 4x3.5x24x0.25. The aft end...
-
-
SailormanDan reacted to Dalliance's post in the thread Deck top clutches, organizers, winches with Helpful.
The raised areas for deck hardware mounting might have aluminum plate laminated under the fiberglass for drill and tap hardware... -
Stu Jackson replied to the thread Sizing of exhaust lines and water lift mufflers.You do not have a unique engine. Call the manufacturers of those mufflers, tell them the lengths between the engine, muffler and... -
jssailem replied to the thread Electrical panel rebuild.Been there and have done the same. :beer:
-
agreed. Some times after a particularly difficult and long project, when i'm finally finished, I'll just sit there with a beer or two...
-
jssailem reacted to JamesG161's post in the thread Galvanic Corrosion/zinc depletion question. with
Like.
For a complete Guide look here. https://forums.sailboatowners.com/forums/sailboat-owners-guide-to-corrosion.292/ Jim... -
Ddlochner replied to the thread Sizing of exhaust lines and water lift mufflers.The specs say the exhaust outlet is 1.25". The exhaust hose should be 1.25" or 1.5". The engine needs some back pressure from the...
-
Ddlochner replied to the thread Hunter 29.5 tinted window replacements.Did you try the Hunter SBO store? They have a lot of Hunter parts. https://shop.hunterowners.com/hp/index.php
