All Activity
-
You need something like this: https://forums.sailboatowners.com/threads/getting-under-the-bridge.134372/ Apologies to those who... -
JoeWhite reacted to colemj's post in the thread Galvanic Corrosion/zinc depletion question. with
Like.
Did you see the anode he took off? Was that anode the exact same brand/type as the one you used previously? Has the boat been moved to... -
kloudie1 reacted to BigEasy's post in the thread Head sink hose replacement recommendations with Like.
I recently replaced the 1 1/2” galley & lavoratory drain hoses with Raritan saniflex hose. The OEM hoses that I replaced were 20 year... -
Ddlochner replied to the thread Galvanic Corrosion/zinc depletion question..If you have the silver chloride cell from BoatZincs.com there is a new manual available. The new manual is spiral bound and has photos...
-
Ccolemj replied to the thread Galvanic Corrosion/zinc depletion question..Did you see the anode he took off? Was that anode the exact same brand/type as the one you used previously? Has the boat been moved to...
-
Johann reacted to colemj's post in the thread Lithium Battery Installation feedback requested with Like.
You shouldn't present your unexamined fears as facts. Overcharging. Attached is a pic I borrowed from Rod Collins showing the "damage"... -
Johann replied to the thread Lithium Battery Installation feedback requested.You information is incorrect regarding LFP. The thermal runaway temperature is much higher and the burn temperature is much lower than...
-
Justin_NSA replied to the thread Plastic housing whitener suggestions.I have not been doing that. I will reapply and leave it in the sun -
Ccolemj replied to the thread Lithium Battery Installation feedback requested.You shouldn't present your unexamined fears as facts. Overcharging. Attached is a pic I borrowed from Rod Collins showing the "damage"...
-
-
Dalliance reacted to Cap'n Deke's post in the thread Plastic housing whitener suggestions with
Helpful.
This really depends on the kind of plastic. Not too much you can say about what works and doesn't work until you know that. I'm pretty... -
Yes, the stern. My Catalina 30 had clam shell vents on either side of the stern, up high.
-
fred1diver replied to the thread Engine compartment venting.I believe the inlet is so that when you are moving forward it pushes air in, so kind of passive but helps move air. At least that is my... -
shemandr replied to the thread Connection of Main Sheet to Sole attachment point.We wasted a lot of time figuring stuff out! -
Ralph Johnstone replied to the thread Engine compartment venting.Same here. All I have is a theoretical knowledge and what I'm questioning is, "Why do you need an inlet vent ?" The underside of the... -
-
I think someone told me the biggest cause of fires/explosions were with gasoline engines and not running the blower correctly. But I'm a...
