All Activity
-
eherlihy replied to the thread Dinghy conundrum.I have always had a RIB* (not a RHIB**) with a panel floor, in conjunction with a 2-stroke outboard. Why? I need to store the tender... -
-
mermike replied to the thread Yamaha 30 - Replace Ignition switch.Fuse for the wire. If the wire is 10 AWG, use a 30a fuse. -
shemandr replied to the thread Dinghy conundrum.There are hoists for engines that mount to the transom that use a block and tackle to lift the engine. 11' seems pretty big. I don't... -
mermike replied to the thread Yamaha 30 - Replace Ignition switch.Same here. It might have been Amazon. Get a CH switch, not a cheap knockoff.
-
CCalif. Ted replied to the thread Yamaha 30 - Replace Ignition switch.I used a Cole-Hersee switch from the local Auto/Boat Parts store.
-
Congrats!!! Let's see a picture of the deck...
-
Arrrrggg me matiesss:beer: Cap'n Jim -
-
AThat is there as a floor for a shower. There should be a drain in the floor, and a sump below that with a pump that sends the shower...
-
AIt looks like that is a grate designed to keep you off the floor and allow drainage under the feet. Our boat is designed this way with a...
-
lehighsail replied to the thread Dumb Question.FOSWICK I've never done anything in the head that made me concerned about a wood floor grate being unsanitary. During a flush or... -
My eyes! My eyes!!!! -
-
Rick D replied to the thread Dinghy conundrum.I have towed a hard dink through open ocean for 30 years. I use a bridle from each stern cleat. It's small, 10' with a 3.5 HP 2 cycle... -
RussC replied to the thread Downwind angles.Lots of interesting comments for me to mull over. thank you! I wasn't aware that some of the more basic GPS units could give vmg info... -
capta replied to the thread Dumb Question.That is there as a floor for a shower. There should be a drain in the floor, and a sump below that with a pump that sends the shower...
