All Activity
-
Don S/V ILLusion replied to the thread Dumb Question.That was a prior owner’s choice, not a factory build. -
BigEasy replied to the thread Dumb Question.Agree that it would be more difficult to clean as compared to nonskid gelcoat. Only positive is that is not slippery when wet. -
Why have a wooden floor mat in the head? Doesn't it make it much harder to keep clean and sanitary? -
-
Caboteur replied to the thread AC power tripping.Would you have an automatic resetting GFCI? Once tripped the circuit remains open until you shut off power and turn it back on. -
This is a good time to get acquainted with your GPS' VMG (Velocity Made Good) function. There are a couple of ways to use it. 1... -
BarryL reacted to colemj's post in the thread What Do People Use To Get Weather Info While At Sea? with
Like.
This is true if you have a ham license. If you don't have a license, then there is a yearly fee. Used to be $250 years ago, but that... -
Peggie Hall HeadMistress replied to the thread Winterizing the Jabsco Manual Toilet.Applying a bit of heat using a blow dryer unless you really know what you're doing with a heat gun will solve that problem. A bit of... -
BarryL replied to the thread Downwind angles.Hello, As you have guessed, this is not an easy answer. Maximizing VMG is the goal but you don't want to be racing downwind trying all...
-
Ideally you’d have a polar diagram for your model boat showing boatspeed at every wind angle in each wind range. The next best thing is...
-
This is a good time to get acquainted with your GPS' VMG (Velocity Made Good) function. There are a couple of ways to use it. 1... -
Joe replied to the thread Downwind angles.This is a good time to get acquainted with your GPS' VMG (Velocity Made Good) function. There are a couple of ways to use it. 1... -
They are the same company and use the same contracted manufacturer. As I mentioned above Humsienk is their loss leader line. Built... -
Maine Sail replied to the thread Lithium Batteries.They are the same company and use the same contracted manufacturer. As I mentioned above Humsienk is their loss leader line. Built... -
I fully rewired my 88 wing keel. However I am an electrical contractor so what is an everyday task for me might not translate to being... -
jssailem replied to the thread Furler line selection.I would not think tension on your halyard would cause an issue on your bearings. Adequate tension on your forestay is important for the...
