All Activity
-
Leeward Rail reacted to Crazy Dave Condon's post in the thread Cast iron keel has some decent corrosion. Should I address it now before a first sail? with
Helpful.
If your Hunter 23 wing keel boat is out of the water, put some water in the bilge and let it sit for a couple days. Check the keel to... -
Leeward Rail reacted to dlochner's post in the thread Cast iron keel has some decent corrosion. Should I address it now before a first sail? with Helpful.
The procedure you have described is almost correct. Bring small sections of the keel to bright metal, immediately coat with Ospho or...
-
thinwater replied to the thread Vented loop necessary?.You can't use a poppet (spring) check. They also tend to clog. A swing check will work, since they require practically no opening force... -
Captain Larry-DH reacted to danooxnard's post in the thread Cast iron keel has some decent corrosion. Should I address it now before a first sail? with
Like.
I vote for fix it now while it is out of the water. And definitely look at the keel bolts. This kind of work is much easier while the... -
Captain Larry-DH reacted to dlochner's post in the thread Cast iron keel has some decent corrosion. Should I address it now before a first sail? with Like.
The procedure you have described is almost correct. Bring small sections of the keel to bright metal, immediately coat with Ospho or...
-
capta replied to the thread Vented loop necessary?.The water in the sink can go down into the bilge if the water in the sink is above the entry point of the bilge water hose, without a... -
jssailem reacted to Crazy Dave Condon's post in the thread Cast iron keel has some decent corrosion. Should I address it now before a first sail? with Like.
If your Hunter 23 wing keel boat is out of the water, put some water in the bilge and let it sit for a couple days. Check the keel to... -
CCrazy Dave Condon replied to the thread Bent furler remedy.Look for any. ID on the furler and aluminum extrusions
-
CCrazy Dave Condon replied to the thread Cast iron keel has some decent corrosion. Should I address it now before a first sail?.If your Hunter 23 wing keel boat is out of the water, put some water in the bilge and let it sit for a couple days. Check the keel to...
-
fred1diver replied to the thread Its funny Friday!.It’s a promotion that goes with the new Wednesday Tv series -
CCrazy Dave Condon reacted to dlochner's post in the thread Cast iron keel has some decent corrosion. Should I address it now before a first sail? with Like.
The procedure you have described is almost correct. Bring small sections of the keel to bright metal, immediately coat with Ospho or...
-
Ccolemj replied to the thread LFP for AGM Battery Swap.That is a general description of the purpose of fuses. But in your case, you want to size the fuse to protect the wire it is attached...
-
Don S/V ILLusion replied to the thread Deck core repair around mast base. Oday 23-2.As you have to rebuild the mast step anyway, why not eliminate another hole in the deck for running wires and just run them directly... -
Don S/V ILLusion replied to the thread Deck core repair around mast base. Oday 23-2.Not sure what you mean by “mast plug”.
-
The Blue Sea MRBF 125 A terminal fuse I’ve installed for each battery is listed with an interrupting capacity of 10,000 A @ 14 V DC...