All Activity
-
Davidasailor26 replied to the thread Genoa head not wrapping.Good catch. I missed that too. I think you’re exactly right - there’s a lot of cloth and stitching at the head there and not a lot of... -
Spindrift NH replied to the thread Genoa head not wrapping.The op stated that it’s a new 140 genoa, in which case I would suspect that the head patch is stiff and doesn’t like to be bent around... -
This sounds pretty typical of diesel bug getting stirred up and blocking fuel supply. Could there be a screen on your fuel pickup tube... -
Davidasailor26 replied to the thread Genoa head not wrapping.That’s my guess too. One thing that can happen on older sails is that the leech can stretch out and no longer be under as much tension...
-
Joe replied to the thread Genoa head not wrapping.You might also experiment with a little higher hoist to snug up the halyard restrainer closer to the swivel. It may keep the wrap a... -
Davidasailor26 replied to the thread Replacing injectors.This sounds pretty typical of diesel bug getting stirred up and blocking fuel supply. Could there be a screen on your fuel pickup tube...
-
sailcapt340 replied to the thread Hunter 340 - correct mast rake.I can share some photos I have of the 1999 and 2000 - 340. I have the manual that came with my 2000 - 340 on “ How to Tune the Rig”. I... -
-
Hello all, We did a lot of work on our countertops this season, but one thing we keep noticing is that the area above the fridge is... -
Thanks everyone, glad to know I haven’t been doing it wrong! -
I'm pretty sure that if it got through your toilet pump a dockside pump out station should have no problem sucking it out of your...
-
jssailem reacted to marcham's post in the thread Hunter 380 owners with Flexofold folding propellers, diameter and pitch? with
Helpful.
Circling back.... for the record, I have a 2001 Hunter 380 with in-mast furling. Normal cruising weight was indicated at 21 000 lbs... -
Ralph Johnstone replied to the thread Hunter 29.5 2GM engine vibration.Sorry @Brian M H23. I did not mean to take away from the effort you've put into this project so far. You are to be congratulated on... -
Gary. I stand corrected you are right. Need new jib or move car forward.
-
Leeward Rail replied to the thread Installing a "Visa Marine 319 MSD" in a Catalina 22..I sold the boat so I don't know the current condition of the unit. I will contact the new owner and see what he says. -
Be sure any shop you use has a quality spray pattern test equipment. Bosch is known as premium piece of equipment. It tests pressures...
