All Activity
-
Make sure you get a quote for the labour and parts before you get them rebuilt.... parts costs for Yanmar has gone up.... last injector... -
Certainly the copper washer may have been ignored when the injector was last removed. Some times these washers stay in the injector hole...
-
I believe on the Yanmar it's a copper washer. I think this is the part he would need for the GM-series--but definitely do confirm. It...
-
Some injectors also have a type of O ring internally; but not all.
-
Normally a bronze washer between the Injector and Engine. Jim...
-
Can you send them to a rebuild service. Years ago I sent the injectors for a Yamaha outboard to a service center for rebuild &...
-
Tally Ho replied to the thread Rudder (Skeg) Surprise – Found Water, Found Cracks… Found a New Project.I haven’t had to drain mine, but 2 buddies at my marina with newer Hunter 33’s both had water in their rudders. They drilled holes to... -
Yes. I don't believe that pressure treated would be all that advantageous as the floor shouldn't be immersed in water - and if it is, I...
-
ggrizzard replied to the thread Rudder (Skeg) Surprise – Found Water, Found Cracks… Found a New Project.Having had my skeg professionally removed twice over the past 43 years, I can tell that whoever did the work on yours was an amateur...
-
ggrizzard reacted to Tally Ho's post in the thread Rudder (Skeg) Surprise – Found Water, Found Cracks… Found a New Project with
Helpful.
Seems like a reasonable approach if you can get down to solid glass. But do yourself a favor….if you see any water oozing from the... -
When inserting the plugs, I recommend using varnish or the wood finish rather than glue. If you ever need to remove them again, you will...
-
ggrizzard reacted to Ralph Johnstone's post in the thread Companionway handle confusion with Helpful.
Take it slow and easy and you've got an identical job to the original.
-
Peggie Hall HeadMistress replied to the thread Recommissioning head and holding tank.Most hardware stores sell muriatic /hydrochloric acid in quart or liter bottles...I've never seen in gallons. It's used as needed to... -
BWhen I peeled back the stuffing box on my shiny shaft, I found the damage had been done over the past 9 years plus. My first thought...
-
Rich Stidger replied to the thread Companionway handle confusion.When inserting the plugs, I recommend using varnish or the wood finish rather than glue. If you ever need to remove them again, you will...
