All Activity
-
The cleat you pictured is better suited for a mooring cleat, on the boat or dock. Dockside cleats are normally galvanized, whereas... -
II have finally decided that it is time to deal with the rusty compression post on our 82 Hunter 30. I don't want it to crumble and...
-
-
Joe replied to the thread Adding cleats to the mast.The cleat you pictured is better suited for a mooring cleat, on the boat or dock. Dockside cleats are normally galvanized, whereas... -
A wide based cleat like that will probably not match the round contour of the mast. Part of the base will be sticking out ready to chafe... -
Came across something like this looking for a snowplow for my tractor. Really cheap. In Alaska. The address was a big box store with a...
-
Recently a couple of "too good to be true" posts have come up where someone is shopping for an item and finds a price that is "too good...
-
Dave, I just used that as an example for the HP comparison, NOT the type of motor. Oddly enough, that no-gears, air-cooled puppy was...
-
jssailem replied to the thread Seacock Quality... Replace?—Currently on the hard..That strainer works. The connection is a 90º and has been down sized to match the hose. There are fittings that will match the strainer...
-
DThis might prove interesting and amusing. :biggrin: https://youtube.com/shorts/qtzdKZm-ybY?si=RdYZHB__8_6KY-Ks
-
Now there's a VERY generous offer!!! dj -
If you send me the part I can make you a replacement . No cost .. I've had to make a fair share of parts like this for other folks
-
Stu Jackson replied to the thread Cheap outboard.Dave, I just used that as an example for the HP comparison, NOT the type of motor. Oddly enough, that no-gears, air-cooled puppy was... -
PaulK replied to the thread A blessing or a curse?.This will give you an idea about the shape of the rudder. Looks pretty simple: JAVELIN 14 (FOX) - sailboatdata -
How does he keep the battery charged if his engine isn't working? Replacing the engine is roughly 10K$ according to various posts. 5K$...
-
Ddlochner replied to the thread Cheap outboard.This air cooled motor reminds me of the old British Sea Gull motors. They ran great when you could get them started. I'd look for a...
