All Activity
-
jssailem replied to the thread Windflite 14.If cost is a challenge, buy some low cost 3/16 to 1/4" nylon line at a box store and cut lengths Use them as a template. To raise the... -
-
PaulK replied to the thread More Scams.Came across something like this looking for a snowplow for my tractor. Really cheap. In Alaska. The address was a big box store with a... -
BigEasy reacted to jssailem's post in the thread Seacock Quality... Replace?—Currently on the hard. with
Like.
I chose to match the through-hull, strainer, and hose diameter to the pump intake diameter. That way, I know there is adequate flow... -
PaulK replied to the thread Cheap outboard.How does he keep the battery charged if his engine isn't working? Replacing the engine is roughly 10K$ according to various posts. 5K$...
-
jssailem replied to the thread Windflite 14.Let us know if you have additional questions.
-
kloudie1 reacted to jssailem's post in the thread Yanmar 3JH4E starting issues - Sun Oddysey 39DS with Like.
:plus: Your description could be associated with a questionable electrical connection in the starter system. When the engine is cold... -
I'm thinking that if you've got a battery big enough to start a diesel that you can't start anyway, you might as well use it to run a...
-
jssailem reacted to BigEasy's post in the thread Seacock Quality... Replace?—Currently on the hard. with
Helpful.
As a general rule, head discharge, head sink drain, & galley sink should be 1.25 to 1.5“ and water intake lines for engine & head intake... -
Search Amazon for “throttle cable ends” or “throttle cable stops”. There’s lots of them, different styles, etc. you should be able to... -
BigEasy replied to the thread Seacock Quality... Replace?—Currently on the hard..As a general rule, head discharge, head sink drain, & galley sink should be 1.25 to 1.5“ and water intake lines for engine & head intake...
-
BigEasy reacted to jssailem's post in the thread Seacock Quality... Replace?—Currently on the hard. with Like.
Just Do It.... In for a penny, in for a pound... Simple phrases from an old generation. They provide interesting guidance. If you...
-
BigEasy reacted to dLj's post in the thread Seacock Quality... Replace?—Currently on the hard. with Like.
I like to work entire systems. I don't like a bit here and a bit there. What do I mean? When I changed my halyards, I changed every...
-
The steel mesh hose's fitting on this quick connect failed (I think it's a Whale fitting). It is from the water heater. I cannot figure...
-
That dark grey fitting is a no name Chinese fitting. They are all over Amazon. The white ones look like Whale fittings. THe dark grey...
-
Recently a couple of "too good to be true" posts have come up where someone is shopping for an item and finds a price that is "too good...
