Zinc Anode

Status
Not open for further replies.
A

Andy Paine

Looking for exact replacement. Old zinc was on prop shaft between the two nuts. If not, is there room for a "shaft zinc" (split halves) ? Thanks andy paine Peka-Boo
 
C

Capt Ron;-)

Zincs

Andy, The shells come in all sizes, and you don't specifically need it on the end of the nuts. Zinc can be cut too.
 
C

Capt Ron;-)

Zincs On Shaft

Andy, The shells come in all sizes, and you don't specifically need it on the end of the nuts. Zinc can be cut too.
 
A

Andy Paine

Thanks!

Thanks for the replies! Looks Like BoatZincs.com has the solution. andy
 
A

Andy Paine

Boat Zincs NG

Ordered a "Zinc" from Boat Zincs. They only had one with my shaft size (1"). It was HUGE. So it didn't work. My diver was able to 'kludge another zinc' as temporary. Still looking for a "PROPER REPLACEMENT" 1978 Pearson 35 andy :-(
 
J

Jack

P 35 zinc

Camp makes the zinc you refer to. For the 1 inch shaft you want the P-4 zinc
 
Status
Not open for further replies.

Top Bottom