Yanmar 4JHE Anodes?
- Thread starter Nodak7
- Start date
No anodes in that engine that I am aware of (as have a 4JH3E) as I have not seen any mentioned in the manual for the engine or seen any on the engine.
Thanks as I thought but the other night I was looking at the 4JH4 Service Manual and found this entry under the 250 HR and 500 HR Maintenance recommendation. The manual does not state it is for the 4JH4E Specifically but I thought that the "E" was only a small variation on the engine type. Just wanted to make sure I was not over looking anything! Thanks again!
I have never found an Anode on my Volvo Penta, either.
Hunter expected the shaft and engine to be "electrically connected" together.
Thus Anode protection.
If your shaft is NOT isolated from engine, you shaft anodes should protect it.
Jim...
PS: I have verified that my engine is at the same galvanic potential as shaft, with a AgCl reference probe.
Hunter expected the shaft and engine to be "electrically connected" together.
Thus Anode protection.
If your shaft is NOT isolated from engine, you shaft anodes should protect it.
Jim...
PS: I have verified that my engine is at the same galvanic potential as shaft, with a AgCl reference probe.
