wiring diagram for autohelm3000... NOT the ST version!

[centerline]

I know its a long shot but im hoping someone has a link to a wiring schematic for a autohelm 3000.... this is NOT the ST version, which i can find available, but nothing for the 3000 analog.

specifically, I am looking for the wiring diagram for the autopilot circuit....

thanks for any help you may have.

 

[Maine Sail]

The old 3000 WP's are pretty much plug & pay with the exception of the "plug" on some models.. SeaTalk 1 is YELLOW = DATA, RED = POWER, SCREEN = GND the only other wires you should have are 12V B+ & B- with B+ on very old units being brown... That said I would not waste a heck of a lot of time trying to revive one....

 

[justsomeguy]

"...plug and pay..."

That's pretty funny!

 

[stephen Penny]

Installation and operating manual attached.

 

[Maine Sail]

"...plug and pay..."

That's pretty funny!

While not intended, quite true on older units....

 

[centerline]

the unit works fine...no issues. but im trying to find a way to connect a wired remote from an ST4000 into the 3000 unit.

the plug and socket is different between the two units, but im not sure the actual remote is, as they look the same.
so i need a wiring schematic.

I really dont know the difference between the 3000 analog and the 3000, although the ST models are quite different.