Am going to do the windows on Journeyman, with rubber. There is a lot of material in the archives about the windows but it is hard to determine what is correct. Has anyone actually done the windows, with rubber, with the apparently correct stripping? If so, would love to have the supplier and part numbers. (and I need the tool.)Nicholas Walsh
Nicholas H. Walsh P.A.
111 Commercial Street
Portland Maine 04101
Tel. 207/772-2191
fax 207/774-3940
This email was sent from the law firm of Nicholas H. Walsh P.A. It may contain information that is privileged and confidential. If you suspect that you were not intended to receive this email, please delete it and notify us as soon as possible. Thank you.[Non-text portions of this message have been removed]
Nicholas H. Walsh P.A.
111 Commercial Street
Portland Maine 04101
Tel. 207/772-2191
fax 207/774-3940
This email was sent from the law firm of Nicholas H. Walsh P.A. It may contain information that is privileged and confidential. If you suspect that you were not intended to receive this email, please delete it and notify us as soon as possible. Thank you.[Non-text portions of this message have been removed]