Window mold for Hunter Vision 32 line

[coxjam]

Lots of posts in the past about this topic, unfortunately it's info is all out dated. I would like to order a replacement window for the Port side of my 1989 Vision 32 without having to remove the old one first in order to have a local plastics fabricator use it as a mold. That means leaving my boat windowless for weeks because of the distance I live from my boat. Marks Plastics in CA does not have the molds, nor does Hunter Marine. A third company who's name escapes me that originally manufactured these windows for Hunter is no longer in business. These 3 options are the only leads I have found in past forum posts, which some are as old as 2000 and 2002.

If anyone has some update info with a company name, I would appreciate the tip.

Thanks

James

 

[Steve Dion]

James:

I would check with a local marine yard. We have a guy on the west coast, but I do not know of anyone in your area.

Probably any plastics fabricator could probably do this for you. I think you could trace the piece in place so someone could fabricate one for you.

 

[coxjam]

Yes, that's my point though. I m looking for a company that may have done this for a previous owner and may have the mold already. It would be very helpful to simply order the window, rather than have one made from my mold, which is what I will do, as a last resort. Thanks!

 

[coxjam]

Oh Steve, we don't have one (marine plastics) in the local area, the nearest in San Antonio, won't do a tracing, they want the mold.