Window covering ideas

[BrokeNotBroken]

I tried to make some window coverings for my Mac and thought I had a pretty good idea. However, the end product didn't really look as nice as I would have hoped. So, I'm looking for suggestions or images of other's window coverings. I was hoping to make something that fit inside of the window cutouts because I don't want something rubbing against my head when I sit down. Thanks in advance.
-david

 

[MrBill_FLL]

IIRC the factory had 2 alum flat rods, so its held top and bottom... keeps it snug against the hull...

no, I'm wrong. just top slots... but you could add a bottom rod

http://i64.photobucket.com/albums/h169/ftldiver2/MACGREGOR/picmacgregor26s120e.jpg

(^not my boat)

this is my boat

http://i5.photobucket.com/albums/y159/ftldiver/mac/e13aa28c.jpg

(a mess)

 

[Justin_NSA]

I use these Peek-a-boo shutters from Zarcor. If you put a sheet of paper over your window(s) and trace the outline, they can cut shutters to fit in the window recess. Request some samples and see if they are for you. I put one of the samples over the window in the head. I didn't trim it to fit inside.

http://www.sail2000.com/products/peek-a-booo/index.php