Who made the Ports

[SHADS]

Trying to figure out who made the ports for our 1994 Hunter 26. There are no visible markings and looking in the manual I can't find the marker. Any ideas? I need some replacement screens.

 

[Phil Herring]

Are the frames plastic or aluminum?

 

[BrianW]

This is the manufacturer some of the opening ports.
http://www.pompanette.com/bomar

BrianW

 

[Dave Groshong]

One for sure is the Gray Enterprise size 715, should have a stamp on the lower part of the frame, inside the boat: "Gray Enterprises of Tampa, FL"

http://shop.hunterowners.com/prod.php?50325

 

[SHADS]

Two are black and one is gray, but all are plastic.

 

[Crazy Dave Condon]

Phil Herring,

send an email to Eddie B. and he can advise the model number. YOu would be a good assest to sell them as the opeing ports are generally those needing replacement for one reason or another over the years.

crazy dave condon

 

[BrianW]

Phil, I wish HunterOwners.com Store would also offer the fixed ports and the H26 "windshield".... especially if you provide at a more reasonable price than Hunter. BrianW

 

[Phil Herring]

Hi Brian,

We're working on that. It's a huge project that involves sorting data from hundreds of patterns but we hope to have it done in time for next season.

 

[rlrmystic]

I'm in need of 'windshield' glass on my 295 model Hunter as well. One screwhole has developed a 4" crack.

 

[Crazy Dave Condon]

great to hear from you phil as this willl help all for all your fine work.

crazy dave condon

 

[paulh1]

Shads, if you are going to replace the side spring up ports then you're in for a challenge. The springs are a"bear" to replace. Maybe someone out there knows an easier way but this was a very frustrating experience.