I'm installing airconditioner duct work and want to remove the vanity & sink in the head so I can run duct behind or in front of the sink.....there are about 25 screws under little decorative covers that can be removed that would appear to allow someone to simply lift off the vanity top....My concern is will I ever get it back on? The screws have never been removed. any suggestions or experience with this?
- Status
Can't help you but you could help me
I've got a 272 and want to put an airconditioner in it. Could use any suggestions you might have. michaelschiele@bellsouth.net
I've got a 272 and want to put an airconditioner in it. Could use any suggestions you might have. michaelschiele@bellsouth.net
Now tell me again why you decided to ...
go through the port side instead of Starboard behind the head? Vic "Seven"
go through the port side instead of Starboard behind the head? Vic "Seven"
Capped screws are easy
Pat, I'm surprised that you did not get a response on this. The capped screws are easy to remove, just pop off the plastic caps with a thin driver and you will find phillips head screws with clip washers under them to hold the caps. Now just remove the phillips screws and lift the sink out after taking care of plumbing connections. Brian, 88' 272LE Hosanna.
Pat, I'm surprised that you did not get a response on this. The capped screws are easy to remove, just pop off the plastic caps with a thin driver and you will find phillips head screws with clip washers under them to hold the caps. Now just remove the phillips screws and lift the sink out after taking care of plumbing connections. Brian, 88' 272LE Hosanna.
- Status