Over the past couple of years I know I have seen a few articles on using vacuum bagging for repairs on rudders, decks and hulls. Of course, now that I would like to do it myself, I am having a hard time locating the information. Can anyone point me to a website, or reference an article that would tell me what equipment I need and how to do it? I removed most of the top layer of fiberglass from my rudder about 3 months ago, but still had high moisture readings anyplace where I had not removed the glass. Yesterday I purchased a vacuum pump, and bagged the rudder with the pump running over night. In less than 24 hours, the areas of highest moisture have dropped from 30+ to 10 or less on the meter. I am so pleased with this success, that I am thinking now I should use the pump to make sure I get epoxy into any voids under the remaining glass. Any how-to's, links, or articles would be appreciated.