I would like to know if their is a rised platform behind the pedestal so you may sit instead of stand. The present configuration one cannot see where they are going if they remain seated. Standing is tiring and boring. Is there an after market product to resolve this. The bench behind the pedestal opens up using two hinges. I would think that if this could be replaced with one that rises. Standing is killing me with leg cramps and back pain. Help Help. I also have the original parts catalog for my 1982 catalog 30.
- Status
- Not open for further replies.
M
Mike Turner
Helm Seat Options
There are several options for helm seating: * I've seen some C-30s with custom-made helm seats in teak, in the traditional "humped" style. There's a basic plan for one in the book, "The Finely Fitted Yacht." If you're handy with tools this could be a nice custom addition to your boat. * Some people advocate bean bags -- good for this use as well as casual seating in the cockpit or on deck while at anchor. * The major commercial cockpit cushion manufacturers make closed-foam helm cushions, both in the traditional "hump" style as well as a saddle-type configuration said to prevent sliding on tacks. * You can use a large fender, either cylindrical or the "rafting" type which look similar to the "saddle" type closed foam helm seats. * I use a $6 Rubbermaid step stool. It's tall enough, it can be moved around the cockpit on tacks, and can also be used as a stepstool into the v-berth and as a step on the dock to get aboard. I'm thinking of upgrading to a wooden, varnished stool, but it's worked well for me. I envy you your catalog -- do you know of a source for others? Mike Turner S/Y Amity -- 1982 C-30 Long Beach
There are several options for helm seating: * I've seen some C-30s with custom-made helm seats in teak, in the traditional "humped" style. There's a basic plan for one in the book, "The Finely Fitted Yacht." If you're handy with tools this could be a nice custom addition to your boat. * Some people advocate bean bags -- good for this use as well as casual seating in the cockpit or on deck while at anchor. * The major commercial cockpit cushion manufacturers make closed-foam helm cushions, both in the traditional "hump" style as well as a saddle-type configuration said to prevent sliding on tacks. * You can use a large fender, either cylindrical or the "rafting" type which look similar to the "saddle" type closed foam helm seats. * I use a $6 Rubbermaid step stool. It's tall enough, it can be moved around the cockpit on tacks, and can also be used as a stepstool into the v-berth and as a step on the dock to get aboard. I'm thinking of upgrading to a wooden, varnished stool, but it's worked well for me. I envy you your catalog -- do you know of a source for others? Mike Turner S/Y Amity -- 1982 C-30 Long Beach
D
Dean Bachelor
yup me too
Hey L, I've suffered with the same problem this past summer on my 85 C30, I ended up using an 8" bumper or 2 throw cushions, both are lousey options. I like the stool idea but boat butt is still a problem. I would like to find out more about the foam that mike spoke about. The other thing I've done to help my legs on long tacks is cut a piece of plywood to fit on the floor and attach a 2x4 to one end so you get a little flatter area to stand on, it helps. Sail on, Dean
Hey L, I've suffered with the same problem this past summer on my 85 C30, I ended up using an 8" bumper or 2 throw cushions, both are lousey options. I like the stool idea but boat butt is still a problem. I would like to find out more about the foam that mike spoke about. The other thing I've done to help my legs on long tacks is cut a piece of plywood to fit on the floor and attach a 2x4 to one end so you get a little flatter area to stand on, it helps. Sail on, Dean
M
Mike Turner
Foam Cushions
For more info on the foam cushions, check the chandlery at this site under "Cockpit, Cushions, Helm." These are the ones by BottomSider. There's a new one called the "Flat Cushion," as well as the humped and saddle ones. As to "boat butt," I use an inexpensive stadium seat or sometimes a flat throwable cushion on top of my stool. I like the plywood/2x4 idea in the cockpit sole, I think I'll be giving that a try. Mike Turner S/Y Amity Long Beach
For more info on the foam cushions, check the chandlery at this site under "Cockpit, Cushions, Helm." These are the ones by BottomSider. There's a new one called the "Flat Cushion," as well as the humped and saddle ones. As to "boat butt," I use an inexpensive stadium seat or sometimes a flat throwable cushion on top of my stool. I like the plywood/2x4 idea in the cockpit sole, I think I'll be giving that a try. Mike Turner S/Y Amity Long Beach
T
tassber
comfort
Nothing like an autopilot! I used to use a small bean bag chair at the helm. It worked great.
Nothing like an autopilot! I used to use a small bean bag chair at the helm. It worked great.
C
cole
my butt fell asleep
I had the same question a while ago and someone in wilmington NC had mounted a small pedestal seat on the laz cover. It could swivel and move forward and back ( are you the only one who drives?) I think he did it for about 1.2 boat units you coul turn the chair arround and still get in to the laz. cole lets go sailing!
I had the same question a while ago and someone in wilmington NC had mounted a small pedestal seat on the laz cover. It could swivel and move forward and back ( are you the only one who drives?) I think he did it for about 1.2 boat units you coul turn the chair arround and still get in to the laz. cole lets go sailing!
A
Angelo Guarino
how about a sling?
I don't own one, but I'd have to imagine that one could take a nice blank of 1 x 12, attach a cushion, and a couple of lines and sling a padded bench from port to starboard at the very rear. The benefit of this approach would be that it would take very little space when not being used and could be easily stowed. Also, you could just release the forward lines and allowing the front of the bench to swing down and stowe it ready for use against the inside of the transom. Just an idea. .. Angelo
I don't own one, but I'd have to imagine that one could take a nice blank of 1 x 12, attach a cushion, and a couple of lines and sling a padded bench from port to starboard at the very rear. The benefit of this approach would be that it would take very little space when not being used and could be easily stowed. Also, you could just release the forward lines and allowing the front of the bench to swing down and stowe it ready for use against the inside of the transom. Just an idea. .. Angelo
L
Larry W.
- Status
- Not open for further replies.