Thanks for your help. I have contacted rig rite company and they have similar ones but not the same. The goiot 823 toe rail is now fabricated with square slots and different dimensions between slots and screw holes. The old one is the one used by my boat but is no longer available. That means that I will have to remove the old ones and install the new ones. This is a mayor project because this toe rails are riveted and covered underdeck with epoxy they are not screwed. This is good because you don't have leaks but to remove them you have to drill each and everyone and dismantle a lot of covers specially in the galley area. Since I only need about 10' of toe rail I will see if its is possible, with custom parts department at rig rite, to fabricate it. I can provide the drawings for fabrication. Thanks again for your help.
