Time to replace Holding Tank, Advise Please!

[Dave Brengelmann]

We've got to replace an old aluminum holding tank that's got a major crack in the top. Any recommendations? What's the best way to get the biggest plastic tank possible for the space installed?

 

[Paul Akers]

Head Mistress?

Check with the Head Mistress on this site. Her company specializes in custom fitted tanks.

 

[Peggie Hall/Head Mistress]

We can help...

We have close to 100 non-rectangular shapes to offer...e-mail me an address the snail can find and I'll send you a catalog. peghall@att.net

 

[Roger]

We did it.

We just re-did our entire waste system in our '90 H35.5. Replaced the tank using a stock 35 gallon Todd polyethelyne tank from West Marine (approx. $125). Access to the tank was made by carefully cutting an opening through the aft cabin bulkhead. In order to fit this large a tank, we built a platform in order "flatten" the hull curvature. While in there, we also replaced all of the hoses (did'nt want to have to return to the scene for a long time).Good luck on yours.