Throttle cable
Alain;There should be a clamp on the throttle cable. It most likely has loosened or come completely off of the cable. The clamp, when tightened, exerts some pressure on the outer cable sheath, squeezing it against the inner cable. Very low tech! Adjust it to get the correct cable tension. If it is not there (look near one of the cable ends.), you can buy one from Morse Cables and probably Edson. You might want to try a small "C" clamp, or some other device, before you buy the required clamp to make sure that is the problem. Just don't tighten the thing so as to ruin the cable. Easy does it. Tighten a bit at a time then try the cable. You'll know when it's right. I don't know if West Marine, Defender or Boat/US carries the clamp. You might want to check with them.Good LuckPAT