Duh! If one does burn out, how the heck do you replace a bulb in one of thos nifty recessed light fixtures in the cabin of a 310?
- Status
Bulb Replacement
Good question. Think we counted 20 light fixtures in our 320. We'd like to know also.
Good question. Think we counted 20 light fixtures in our 320. We'd like to know also.
Replacing bulb and switch
I suspect your recessed light fixtures are the same as mine in a '99 H380. Use a thin knife blade to pry out the circular ring that surronds the lens. It should pop out fairly easily. It is a bit like taking the hub cap off. A little here and a little there. My bulbs are working fine, but a switch gave out. The dealer just cut the wires and put a new switch in. Hope this helps. Les
I suspect your recessed light fixtures are the same as mine in a '99 H380. Use a thin knife blade to pry out the circular ring that surronds the lens. It should pop out fairly easily. It is a bit like taking the hub cap off. A little here and a little there. My bulbs are working fine, but a switch gave out. The dealer just cut the wires and put a new switch in. Hope this helps. Les
Thanks Les
I thought that was how it must work, but when I applied pressure to the rim it felt like the entire fixture wanted to pop out of the headliner. Since I was just fooling around to see how it worked, I thought I'd ask before I accidentally broke something!
I thought that was how it must work, but when I applied pressure to the rim it felt like the entire fixture wanted to pop out of the headliner. Since I was just fooling around to see how it worked, I thought I'd ask before I accidentally broke something!
- Status