I have a 30A ProMariner FS that I test every season. I just tested mine and got an odd result....when testing diodes in one direction I got a good reading and in line with what I’ve historically seen. However when I tested the reverse (reversing contacts), I got a good reading, however my MM beeped the whole time (you’re supposed to keep the contacts on for a minute or so).
What is different is the MM—Since my last test I’m now using a Fluke 115. I have used it many times since Spring so I know it’s working.
So my question is anyone with a Fluke or similar weigh in on whether this is normal. Just to emphasize, the readings are good and no ‘OL’ ....thanks....
What is different is the MM—Since my last test I’m now using a Fluke 115. I have used it many times since Spring so I know it’s working.
So my question is anyone with a Fluke or similar weigh in on whether this is normal. Just to emphasize, the readings are good and no ‘OL’ ....thanks....