Taking the fuel tank out

[alan_critchlow]

Hello, I got my web site back up that illustrates how I got the fuel
tank out. It is on the link page of this group or more specifically

Taking the tank out

I hope this helps

Alan & Felcity V1639 Voila

 

[vega2055]

Hi Alan

The best wind generator is probably the Aerogen.Very
relaible and silent... There is a shop near Chateaugay
(Solaire desing )that have them in stock .
www.solairedesing .com.

I'm tring to find a replacement product for the
waterproofness of cockpit floor, cockpit lids, and
font hatch.What did you use?


patrice


vega2055

 

[alan_critchlow]

Bonjour Patrice

I used a product made by Taco Metals for hatch seals.

Loading…

66.98.194.54

usr=51G5288155&rnd=6461355&rrc=N&affl=&cip=&act=&aff=&catstr=&pg=ste_c
at&ref=cat_weather_seal

Whoaa, that is a big link. Try www.tacomarine.com under trim &
molding then weather seal and hatch tape. I used 0109 for the forward
hatch and 0748 for the cockpit lockers. These products are readily
availible at most marine stores.

I can vouch for the forward hatch seal. I did not study the tide
tables before leaving Miami. We put the bow of Voila through some
waves up to the mast. A little choppy. The boat stayed bone dry.

I checked out the site for Quebec dealer for Aerogen. Pas donner. I
like that it is a bit smaller than other models.

I will pass by to look at the Aerogen next time I am in Chateauguay.

Thank you for your help

Alan & Felicity V1639 Voila

 

[vega2055]

Alan
Did you order the wheather seal direcly from the
company or you found it in a store in the area?

Thank you for your time

Patrice
vega2055

 

[alan_critchlow]

Hello Patrice, The seals are distrubuted in Canada through Paynes
Marine. Most marine stores can order them. I can certainly get them
as we are a dealer. The retail price is $19.20 cdn for 10 feet of
seal.

Alan V1639 Voila

 

[vega2055]

Alan

I fond the seals at Boat House yesterday.It was a bit
cheaper 'cause they reajust the price due to stronger
value of our canadian money.Thanks anyways. I' m
looking to buy a good used ,or new storm jib for my
vega and also an asymetrical spi.What are the size
best suited for our boats? How much they go for?

Patrice vega 2055

 

[bobnlesafloat]

If you happen to be passing North Yorkshire in the UK Patrice; I have an excellent Vega Spinnaker, complete with poles & sheets, etc. that I'm trying to sell.

Bob Carlisle


patrice bissonnette vega2055@... wrote:
Alan

I fond the seals at Boat House yesterday.It was a bit
cheaper 'cause they reajust the price due to stronger
value of our canadian money.Thanks anyways. I' m
looking to buy a good used ,or new storm jib for my
vega and also an asymetrical spi.What are the size
best suited for our boats? How much they go for?

Patrice vega 2055