- Status
Here is my response in November 2004
Just bought one Submitted by DaveWilson on 11/08/2004 at 11:37AM regarding Hunter 37-cutter I called Hunter and they sent me to: Dahmer Marine Hardware 101 Park Avenue Union Beach, NJ 0775 732-264-5799 Voice 732-264-5963 Fax dahmermarine@aol.com Email The strut you want is an H34 with bearing. It cost $280.35 plus shipping. No need to have one special made, they'll have it in your hands tomorrow.
Just bought one Submitted by DaveWilson on 11/08/2004 at 11:37AM regarding Hunter 37-cutter I called Hunter and they sent me to: Dahmer Marine Hardware 101 Park Avenue Union Beach, NJ 0775 732-264-5799 Voice 732-264-5963 Fax dahmermarine@aol.com Email The strut you want is an H34 with bearing. It cost $280.35 plus shipping. No need to have one special made, they'll have it in your hands tomorrow.
Additionally in Nov 2004
Also consider a stern tube Submitted by Dave Wilson on 11/08/2004 at 11:50AM regarding Hunter 37-cutter Chet, You might also consider a new stern tube as long as you're changing the strut and shaft. That's what my yard here in California advised. Again, Hunter sent me to: Southeastern Foundries Corporation 2706 Oakland Ave. Greensboro, NC 27403 336-299-7211 Talk to Debbie. The part you'll need is a Hunter part number - HM-312930 1 3/4 inch thru hull. Cost $30.00 plus shipping. They too can have this in your hands by tomorrow.
Also consider a stern tube Submitted by Dave Wilson on 11/08/2004 at 11:50AM regarding Hunter 37-cutter Chet, You might also consider a new stern tube as long as you're changing the strut and shaft. That's what my yard here in California advised. Again, Hunter sent me to: Southeastern Foundries Corporation 2706 Oakland Ave. Greensboro, NC 27403 336-299-7211 Talk to Debbie. The part you'll need is a Hunter part number - HM-312930 1 3/4 inch thru hull. Cost $30.00 plus shipping. They too can have this in your hands by tomorrow.
and finally in Nov 2004 re Dripless Stuffing Box
Dripless Stuffing Box Submitted by Dave Wilson on 11/09/2004 at 04:19PM regarding Hunter 37-cutter Chet, I am having one put on my new "old" boat. The yard in Sausalito is taking care of it. But, the HOW site has this item in the Chandlery in the Boat Care section. PSS Shaft Seal Shaft diameter: 1 inch Stern tube diameter: 1-3/4 inch Item number 20012 $179.95 Good luck and I hope your roof gets taken care of quickly. Dave
Dripless Stuffing Box Submitted by Dave Wilson on 11/09/2004 at 04:19PM regarding Hunter 37-cutter Chet, I am having one put on my new "old" boat. The yard in Sausalito is taking care of it. But, the HOW site has this item in the Chandlery in the Boat Care section. PSS Shaft Seal Shaft diameter: 1 inch Stern tube diameter: 1-3/4 inch Item number 20012 $179.95 Good luck and I hope your roof gets taken care of quickly. Dave
- Status