H
Harry
Peggie, I took your advice and checked the air vent for the head waste tank. When I disconnected the hose from the vent, it (the vent) was clogged with dust and spider webs, which I removed. Then I used an old wire halyard as a plumbers snake to remove any possible clogs in the hose. I feed it until it wouldn't go in any further. Prior to all this, I would hear a bubbling sound and could watch the liquid partially back-fill the bowl. All seemed to work fine for awhile, but after about 20 minutes, I checked the bowl, and it again had some water, about three to four inches. No where near as much as before. The head is new this year (August). The tank was emptied just before I installed it. The thru hull was closed, so I'm pretty sure it wasn't "flush" water, although the water was clear. Where should I look now, or is it normal to have a little water in the bowl? Thank you in advance.