Stern Tube Diameter

Status
Not open for further replies.
Sep 24, 2005
16
Catalina 30 Punta Gorda, Florida
Does anyone know what the outside diameter of the Stern Tube on a 1989 Catalina 30, standard rig, wing keel? If not, where could I find these specs. It's not in any of my books. Could I measure it? The shaft diameter is 1". I am going to replace the gland with a dripless and need the specs. Thanks for any information. John
 
K

Ken C30 " Dancin Bear"

Measurements you need

Hi John. This question was asked not long ago. These are the measurements I gave. If you search archives for 2005 under #Dripless shaft seal measurements" you will get lots of info. Somone else had measured it a little differently on their boat. Good luck. Ken Here is the mesurements you need Submitted by Ken C30 " Dancin Bear" on 12/28/2005 at 05:19PM regarding Catalina 30 Hi P.C. Took delivery of my boat a month ago. I had the boat yard foreman come on board and measure my boat up for the dripless shaft seal. I have a 1987 C30 MkII. Hull # 4936. Shaft size is 1" The tube size is 1 5/8". He also said to get the type that is for high speed. Although our shafts will not rev at high speed, this type has a small water line added to it. I believe it is there to cool and lubricate the seal thus extra life and less trouble. I plan on doing mine one day soon. It is on my list to do. Ken
 
Status
Not open for further replies.