Stay Length

Status
Not open for further replies.
J

John

Hi all, My boat lies an hour and a half away and I need to get the the length of my forestay. Anybody have a manual they can check? I've "Googled" high and low for a PDF of the manual and it just doesn't seem to exist! John
 
T

TJ Waggonet

I have a hand me down sheet with all of the rigging info. If you want, I can email it to you for your records. The head stay is a 5/32" 1x19, 28' 1 1/4". twaggoner@ec.rr.com
 
M

Mark Gibson Hunter H22 "Dilly Dally"

Another copy please!!

If it's not too much trouble, could you please send me a copy too. I would very much appreciate it. Thanks, Mark Gibson madimeje@yahoo.com
 
J

Jim K

Ditto a copy

Just got back from the boat and a baby stay is really frayed. I'd just as soon lower the mast and replace it all at the same time. The specs for the baby stay would be great. Thanks a bunch TJ Jim
 
T

TJ Waggoner

Rigging details

Gentlemen, after looking over the specs that I inherited, I have found some inaccuracies. I'm fortunate to have the boat in my backyard so I can get the actual measurements. I will measure the rigging and get a accurate list made up and post them in a day or so.
 
T

TJ Waggoner

Measurements

Here is what I have, the measurement includes attached hardware so make sure to check. 1 Forestay 28' 1 1/4" 1 Backstay 29' 11" 2 Upper Shroud 26' 9 1/4" 2 Lower Shroud 14'
 
C

crazy dave

Seco South

If you are looking to replace the standing rigging, contact Jean at Seco South in florida as they not only have the measurements but made the rigging for Hunter Marine at the time for your boat.
 
M

Matt Borders

Hunter 22 questions for the owners.

My boat is 1 1/2 hours away too so I can't make a measurement from the boat. I will say that for a nomimal fee you can get a copy of the owners manuel for the Hunter 22 from Hunter. Just e-mail them. My manuel is aboard my boat as well. While I have your attention, here are a few quick questions: Do any of you expirence a noise from the centerboard when you are in a slip and there is a cross chop? How do you stop this? How does your sink drain? I have had some problems with mine.
 
Status
Not open for further replies.