Starboard, or similar products?

[dancing bear]

I want to attach my depthfinder, gps and compass to a panel, which would be attached to the hull, in the normal spot. My thinking is I can drill 4 holes in the boat for the panel, instead of 3 or 4 holes per device. This will get all this stuff to one side, making a nice seatback on the other.Am I worried too much about poking holes in my boat? Can you recommend something cheaper than starboard and less cheesy than plasic cutting board?

 

[sailortonyb Allied Mis]

Starboard

Starboard is probably the best bet. Look-alike cutting boards will turn yellow in a relatively short period of time. If you want it to look good, sometimes you just have to spend the money.

 

[Bryce22345]

mounting

had mine mounted on a piece of teak. not a lot more money considering how small it is.Bryce

 

[Larry Wilson]

$20 will probably take care of it

A piece of white oak, beveled edges, bolted to the bulkhead. 5 or 6 coats of varnish. Cost probably less than $20 if you have the varnish left over from other jobs.