Stainless Steel Rail Fittings

[Tim R.]

I am in the process of completely rebuilding my binacle and guard. I would like to upgrade my guard to 1 1/4" but cannot find any fittings of that size. I spent a couple hours searching for these yesterday but found very few.

Does anyone here know of a good source for 1 1/4" SS rail fittings?

 

[Don S/V ILLusion]

[FONT=VERDANA, ARIAL, HELVETICA] [FONT=VERDANA, ARIAL, HELVETICA]Tim

When I did this on our previous boat, the only place I coyuld find that size was from:
Jamestown Distributors
[/FONT] [/FONT] [FONT=VERDANA, ARIAL, HELVETICA]
500 Wood St., Bldg 15
Bristol, RI 02809
401-253-3840/800-426-9284

As i recall, they were Taco parts.

I assume you already checked Edson.
[/FONT]

 

[Tim R.]

[FONT=VERDANA, ARIAL, HELVETICA] [FONT=VERDANA, ARIAL, HELVETICA]Tim[/FONT]

[FONT=VERDANA, ARIAL, HELVETICA]When I did this on our previous boat, the only place I coyuld find that size was from[/FONT][FONT=VERDANA, ARIAL, HELVETICA]:[/FONT]
[FONT=VERDANA, ARIAL, HELVETICA]Jamestown Distributors [/FONT]
[/FONT]
[FONT=VERDANA, ARIAL, HELVETICA]500 Wood St., Bldg 15[/FONT]
[FONT=VERDANA, ARIAL, HELVETICA]Bristol, RI 02809[/FONT]
[FONT=VERDANA, ARIAL, HELVETICA]401-253-3840/800-426-9284[/FONT]

[FONT=VERDANA, ARIAL, HELVETICA]As i recall, they were Taco parts.[/FONT]

[FONT=VERDANA, ARIAL, HELVETICA]I assume you already checked Edson.[/FONT]

Thanks Don, I tried Jamestown but couldn't find what I am looking for. Also went to Taco's website to no avail. I am specifically looking for rectangular guard bases for 1 1/4" tubing. Edson has some round ones that I will use if I have to but would prefer the rectangular ones as they will cover the existing holes of the 1" bases I am removing.

 

[Andy1237]

Have you looked at Garhauer?