Spinnaker Car for 322 Oday 1987

[Mike Booher]

I am having a hard time finding a Spinnaker Car that hooks on the mast of my 1987 322 Oday. I have a Z-Spar/ Diffusion. 7" X 4 3/4 base. The track is part of the mast.

 

[Trevor - SailboatOwners.com]

Measure the track

Hi Mike -Measure the width of the track (should be about 1" to 1 1/4") and the thickness (a little tougher to measure, but should be on the order of 1/8" to 3/16"). One suggestion is to call Garhauer Marine (website below at Related link) with the info and see what they recommend; ask for Guido. With the correct measurements, you should be able to find something that will fit from any of the major hardware players: Harken, Schaefer, Ronstan, Garhauer, etc. Hope this helps,Trevor

 

[Glen]

Mike in Pasadena

Mike,I'm trying to get opinions of the 322 from owners. Would you mind sending me some input?So far the major disadvantages have been too small a diesel and problems with keel bolts. Anything to add? What are the strong points of this model?Will appreciate your info.Glen