My h23 does not have the light and dark blue stripes that are on the upper part of the cabin. I was wondering if any one would would be able to pint me in the right direction where I might be able to replace them. I would also be interested in replacing the factory logo. Any help would be appreciated.
side stripes...
- Thread starter bill20545
- Start date
- Status
- Not open for further replies.
SIDE STRIPES
HI BILL, I'M ALSO IN THE MARKET FOR NEW STRIPES TOO. I FOUND SOME AT US BOATS ON NIAGARA FALLS BLVD. THEY HAD A FEW COLORS, SEE IF THEY HAVE A MATCH OR LIKE I'M GOING TO DO, CHANGE OUT THE COLOR.
HI BILL, I'M ALSO IN THE MARKET FOR NEW STRIPES TOO. I FOUND SOME AT US BOATS ON NIAGARA FALLS BLVD. THEY HAD A FEW COLORS, SEE IF THEY HAVE A MATCH OR LIKE I'M GOING TO DO, CHANGE OUT THE COLOR.
striping
I'm rebuilding a Hunter 23 and also own a vinyl graphics business (I hope I don't get in trouble here for the plug). My wife and I have already recreated the logo and are getting ready to order the vinyls (as close match as possible) and create them for our boat. We can easily make a few more. Email me at jake_@teamseacats.com (REMOVE THE "_" in my email address listed here). I can't supply the long multi-colored stripes that go down the hull below the rub rail, but we can do the ones in front of and behind the windows including the logo. Jake http://www.teamseacats.com/hunter/
I'm rebuilding a Hunter 23 and also own a vinyl graphics business (I hope I don't get in trouble here for the plug). My wife and I have already recreated the logo and are getting ready to order the vinyls (as close match as possible) and create them for our boat. We can easily make a few more. Email me at jake_@teamseacats.com (REMOVE THE "_" in my email address listed here). I can't supply the long multi-colored stripes that go down the hull below the rub rail, but we can do the ones in front of and behind the windows including the logo. Jake http://www.teamseacats.com/hunter/
West Marine, Boat US, Overton's
I think you can find these long rolls of stripes at any of the major marine stores. The real trick is getting them on STRAIGHT!
I think you can find these long rolls of stripes at any of the major marine stores. The real trick is getting them on STRAIGHT!
F
floater
Side Stripes
Try going directly to Hunter. We replaced the red an blue double stripe on our 35.5 this year. Got the stripes from them. It came with the 2 stripes in one strip.
Try going directly to Hunter. We replaced the red an blue double stripe on our 35.5 this year. Got the stripes from them. It came with the 2 stripes in one strip.
no stripes
No sorry. We can do the smaller deckside logos and striping but for the long ones, I recommend trying Hunter directly (those custom color assemblies really have to be purchased in quantity to be justifiable). As for application, lubricate them with a solution of 25% rubbing alchohol, 74.5% water, and a dribble of liquid clothes washing soap. Don't apply in the sun. This solution will allow you to move the graphic around for about 3 minutes so you can straighten it out.
No sorry. We can do the smaller deckside logos and striping but for the long ones, I recommend trying Hunter directly (those custom color assemblies really have to be purchased in quantity to be justifiable). As for application, lubricate them with a solution of 25% rubbing alchohol, 74.5% water, and a dribble of liquid clothes washing soap. Don't apply in the sun. This solution will allow you to move the graphic around for about 3 minutes so you can straighten it out.
- Status
- Not open for further replies.