Looking to replace hose for Sherwood Raw water pump, unable to find correct size of hose from seacock to pump 1994 MK1 Catalina 28 M3-20 Engine. any help would be much appreciated.
Sherwood Raw water Pump hose size
- Thread starter listt123
- Start date
- Status
Since no one responded, I'll give it a try.
I'm confused. You have the boat, right? Why not just take the hose off either the raw water strainer or the pump and measure it?
IIRC, Catalina used 1/2" seacocks, but the hose off the top of the strainer could be 5/8".
The pumps do not dictate the hose size, since the pump comes with threads into which is screwed the barb adapter, like this: http://c34.org/bbs/index.php/topic,6766.0.html
I'm confused. You have the boat, right? Why not just take the hose off either the raw water strainer or the pump and measure it?
IIRC, Catalina used 1/2" seacocks, but the hose off the top of the strainer could be 5/8".
The pumps do not dictate the hose size, since the pump comes with threads into which is screwed the barb adapter, like this: http://c34.org/bbs/index.php/topic,6766.0.html
- Status