I am wondering if anyone has a technique to line up the keel bolt hole when lowering the keel. I always end up fiddling with a screwdriver, trying to locate the hole as someone else turns the crank. Thanks Mike
- Status
Lock bolt
Leave the lock bolt in and lower the keel till it touches. Remove the bolt and from there count the turns of the winch handle till the holes line up. On my V21 it was 7 turns every time.
Leave the lock bolt in and lower the keel till it touches. Remove the bolt and from there count the turns of the winch handle till the holes line up. On my V21 it was 7 turns every time.
- Status