seacock thru hull for holding tank

Status
Not open for further replies.
E

Ed Munson

The handle of the seacock for pumping waste overboard has broken (likely due to in activity) and I need to replace the seacock. Does anyone know the sixe of this seacock and where I can buy one? It looks like an "in line" seacock. I bought a groco one but it has a flange on the bottom that I do not need
 
R

Ron D

.
Jun 16, 2004
24
Hunter 28 Ventura
This may help

Just replaced mine on a Hunter 1991 28. 1.5" White handle ball valve = $73.50 1 bronze nipple = $28.15 2.5 lbr @ $80.00 per hour When getting the old ball valve out "that wouldn't close" the thru hole spun so I replaced and resealed that also. Purchase the valve at the boat yard. Good luck. If you have a 28 there is a good chance of getting stuck upside down in the lazerette, have a friend standby to pull you out!!
 
Status
Not open for further replies.
Top Bottom