Sanitation Hose Fittings

Status
Not open for further replies.
Marc14857

Marc14857

.
Jun 5, 2004
485
Hunter 44 Mystic, Ct
Changing out my sanitation hoses and wanted to replace the 1 inch to 1 1/2 inch hose fittings. Looks like the original one had some gauges and leaks. Can't find any in the Home Depot Lowes or local hardware store and didn't see any at defender or WM. didn't expect this to be a problem as everything else is going relatively smoothly. Anyone have a source for these?

Thanks
Marc
 
Sailvayu

Sailvayu

.
Jul 25, 2007
320
-Irwin -Citation 40 Wilmington, NC
If you are looking for the hose to pipe adapters you can get them from Sealand. i will also sometimes use a reducer to 1-1/4" PVC and then heat the hose some to get it over the 1-1/4 pipe. i hope that helps you out as i was not fully sure what you were asking.

Capt. Wayne Canning, AMS
www.projectboatzen.com
 
Marc14857

Marc14857

.
Jun 5, 2004
485
Hunter 44 Mystic, Ct
Sorry I was not clear. Trying to go from 1 inch sanitation hose which is the
Discharge hose at the head to - 1 1/2 sanitation hose which is the hose on the
Inlet of the holding tank. This is the way it came from Hunter a d I understand
Is standard for this boat.
 
Status
Not open for further replies.

Top Bottom