Sail setting on B&R rigs

Status
Not open for further replies.
P

Palmer King

I've had my H290 for about a year and half and very happy with it. However, she didn't seem to perform as well as I thought she should. A friend who is a big Hobie sailor took one look at the rig and said it looked almost like his. He then suggested some different techniques. I'm wondering if anyone has noticed these traits on their Hunter. Windward: Ignore the telltales. Point as high as you want then set the jib tighter than normal. Pull the main in and point high. Downwind: 1. Let the main out until it almost touches the spreaders, loosen the outhaul and then point further downwind. 2. Set the jib with the pole to windward(!), attempt to go wing-on-wing, but then start pulling the main in (better have a preventer) till it starts to scoop wind into the jib. Adjust the jib accordingly. So, I gave it a try. In 15kn winds, I bladed the jib, pulled the main almost all the way in and to my amazement I got up to nearly 40 degrees off true wind, was holding over 6kn and almost no heel. But, this doesn't work in light winds. I tried downwind 1 with moderate success, but don't have the pole, so couldn't try 2. Has anyone heard of these tricks before? Any success?
 
S

Steve S.

Not yet...

I sailed with a Hobie sailor last weekend, and he said the rig reminded him of his. I have heard this a few times before. One more thing you might try if you have an ASM is wing-and-wing with the ASM and jib, drop the main or pull it to centerline. Our 356 flies like that... Steve
 
F

Frank Ladd

Sounds like standard stuff

For the downwind part the whiskerpole is really essential. If you don't have one then borrow one and you'll be saving to get it as soon as you use it. For upwind work having the jib as a blade gives you great sail shape. At first I wanted a larger genny for my B
 
Status
Not open for further replies.