Got the boat home at limited throttle. Took the pedestal apart and found both levers frozen in place. Shop person was able to press handles out of housing. When I put new bushing onto throttle shaft it would bind at 2/3rd's the. way. Took a metal straight edge and verified that the shaft has a slight bend.
Question: How can I take the bend out of a S/S shaft? Don't want to pound on it as it will flatten the shaft and then never go back into the bushing.
Thanks Hal
Question: How can I take the bend out of a S/S shaft? Don't want to pound on it as it will flatten the shaft and then never go back into the bushing.
Thanks Hal