I am getting all sorts of confilcting info on the rules and regulations for trailering a H260 with its over 8 foot beam. Some say just don t worry about it, others say it depends if the total load is over 4000 pounds (which it is I guess), others say you need to get a special permit. But most are just as confused as I am. Can anybody who trailers his H260 a lot give me some straight dope? I would sure appreciate it. Tip in Texas
Rules for trailering a H260 in Texas
- Thread starter Tip
- Start date
- Status
I trailer mine
all the time from colorado to utah, to arizona, to mexico, no problem. the rule on interstate highways is 8'6'' max. anything over is considered a wide load. My 260 on the trailer is 8'11". I have never pulled a permit and I've never had a problem.
all the time from colorado to utah, to arizona, to mexico, no problem. the rule on interstate highways is 8'6'' max. anything over is considered a wide load. My 260 on the trailer is 8'11". I have never pulled a permit and I've never had a problem.
trailering in TX
We have hauled our 260 all over TX and the southeast US for 3 years and never had a problem. Our favorite TX spot is Port Aransas/Corpus. Just be sure you do not pull into any weigh stations - you are not required to and that is the only place (from my trucking experience) where they may measure you.
We have hauled our 260 all over TX and the southeast US for 3 years and never had a problem. Our favorite TX spot is Port Aransas/Corpus. Just be sure you do not pull into any weigh stations - you are not required to and that is the only place (from my trucking experience) where they may measure you.
- Status