Here more info regarding my question. I am new to the Capri 22 and have only sailed it about six times. As a result, I am on a steep "Learning Curve." Also keep in mind that my previous boat was a 23 foot inboard Diesel, which of course has different handling characteristics. I've found two things that have added to my problem. First, I added a 7/16 thick spacer that lifted the Rudder out of the water that same amount. I did this so the Tiller would sit a little higher in the cockpit, and be more comfortable, also reduce the movement (Up/down) of the rudder. Secondly, I found that the Rudder's Clip Pin, that secures the Pintle in the Gudgeon was to long and was resisting the movement of the Rudder in one direction. I've corrected these two items and things seems to be better! Now I need more practice!!