Rub Rail

[Howard Stiles]

I have a 1978, 23 ft O'Day and I'd like to replace the rub rail which is pretty well shot. Local marine stores do not have a look alike replacement. If fact, they tell me I'll have to replace the molding and the rub rail. I'd like to avoid the expense of replacing the molding. Any ideas out there that might lead me to rub rail that might work in the old molding. Thanks.

 

[Gary Peaden]

contact.....

Rudy at D&R Marine. He has the insert and the holder which can be purchased separately. However, there is a minimum order. I wish I could locate about 2 feet of the black insert (dock rash) Good luck.....Garyhttp://www.odaysailboats.com/home.asp

 

[Howard Stiles]

Contact Number

How do I contact Rudy? Need a phone number or web site. Thanks for your suggestion.

 

[Alan Johnson]

Contact info for Rudy

Here is a link to his web page:http://www.odaysailboats.com/home.aspHere's contact info:Rudy Nickerson D & R Marine, Inc. 14 Water St. P.O. Box 921 Assonet, MA 02702 Telephone (508) 644-3001 Fax (508) 644-3002

 

[Keith]

Rudy of D&R Marine

Rudy Nickerson is at D&R Marine in Assonet, MA. His website is both www.drmarine.com, or the link at the bottom of the last post.He has always had what I needed for my 23. Good luck.

 

[Howard Stiles]

Thanks

Thanks for the address and link. Makes me wonder where I've been. Rudy's site, etc, is rather amazing.HJS