Roller Furling On Hunter 28.5

[Tom]

Does anyone have a suggested source for roller furling on a 28.5 for a do it yourself type at a resonable cost?

 

[cappy]

Furling system 28.5

We purchased a 28.5 ('85) in 1994 equipped with a Harken system. It has been trouble-free for 10+ years as equipped. No snags, easily handled, and easy to service as well as re-fit. It has required minimal maintenance, and continues to serve well. We sail year-round, cold included, and the system is set with a 150% genoa. I don't have the model # at fingertips, but will be glad to provide with time.....Cappy

 

[Jeff D]

Famet

I have one of these on my 28.5 and know of two others with the Famet. This is a very strong system which does not require altering the headstay, minimal upkeep since no bearings and open furling mechanism. I think pricewise it is more than competitive. The link is below. Website needs updating but check out Practical Sailor review. Usual disclaimer about no connection with company etc.

 

[Warren]

H28.5 furling

Ijust purchased a 1986 Hunter 28.5. As it happens, I also sail out of Deale, Md (Herringto North). That is, until Isabel nearly destroyed the place (and my last boat).Anyway, the H28.5 that I just bought has a Hood 810 Seafurl single line furler on it. While it works ok, I don't think this furler would be useful for anything larger than a 110 genoa. If I replace it, it will probably be with a a CDI unit (which can be owner installed).