Rigging:

Apr 2, 2013
283
Hello All, Well I need a little information here, looking at my rigging and need a few things. At the point where the swages tie into the deck, I have three u-shaped anchors, swage mounts on each side of the boat that bolt through the deck. All 6 of mine have seen better days, where can I buy a set, any ideas? Also all my rigging has also seen better days, cracked, rusted and poop out. Can I order a complete replacement set for all my rigging? I was looking and seen Vega rigging back east, will they know what is needed? Steve, do you carry all this stuff? Might you have all this stuff I need? One stop shopping would be great. Larry Sent from Windows Mail
 
Nov 8, 2001
1,818
Hi Larry

I can supply the new U Bolt chainplates and the
ones I make are much stronger. Contact me on steve@...

Cheers

Steve B
From: lewills30@...
Sent: Monday, September 16, 2013 6:34 AM
To: AlbinVega@yahoogroups.com
Subject: [AlbinVega] Rigging:

Hello All,

Well I need a little
information here, looking at my rigging and need a few things. At the point
where the swages tie into the deck, I have three u-shaped anchors, swage mounts
on each side of the boat that bolt through the deck. All 6 of mine have
seen better days, where can I buy a set, any ideas? Also all my rigging has also
seen better days, cracked, rusted and poop out. Can I order a complete
replacement set for all my rigging? I was looking and seen Vega rigging back
east, will they know what is needed? Steve, do you carry all this stuff? Might
you have all this stuff I need? One stop shopping would be
great.

Larry


Sent from Windows Mail
 
Nov 8, 2001
1,818
Hi Larry

Each Vega has slightly different standing rigging
lengths, always advise to get yours' measured

Cheers

Steve B
From: walt judy brown allore
Sent: Tuesday, September 17, 2013 2:34 AM
To: AlbinVega@yahoogroups.com
Subject: RE: [AlbinVega] RE: Rigging:
Hi Larry, One thing you need to be aware of is not all rigging is
the same length for Vega's. Mast height was shorter on the earlier Vega's.
Steve would probably have more info on
this.
Walt To: AlbinVega@yahoogroups.comFrom:
chuck@...Date: Mon,
16 Sep 2013 09:29:39 -0700Subject: [AlbinVega] RE:
Rigging:
Here is some information that will help answer most of your questions