I have a 1986 Pearson 303 with a 2GM20F engine and I need to replace the motor mounts. Has anyone replaced the mounts themselves?
Jerry
New Bern, NC
Jerry
New Bern, NC
Replacing Yanmar Engine Motor Mounts
- Thread starter jrezab
- Start date
- Status
Yes and they were expensive. Something like $750 for genuine yanmar mounts. I cant even really tell a difference. My old mounts were probably still fine but being almost as old as me felt it was time to replace. Doing the alignment is going to be the toughest part.
Jerry, I just did this to the same engine, and the cost of the mounts (4) was around 450, original yanmar for the 2GM20F.
Changing the mounts is not hard at all, as said before the alignment is the hardest part, but with patience you can easily DIY.
Let me know if you have any questions along the way.
Abe
Changing the mounts is not hard at all, as said before the alignment is the hardest part, but with patience you can easily DIY.
Let me know if you have any questions along the way.
Abe
- Status