I have a little Wilma damage to my Oceanis 400. Several rivits popped on the toerail, broke one stanchion base, bent one gate section, cracked the midship chock. I am contemplating doing the repair myself. I can see a couple of things inside that might be a little difficult to remove in order to access the bottom side of the fastners. One is the paneling over the galley area, and the other is the aft port berth closet and storage rack. I have not been able to determine the best way, or right way to remove these withour destroying them in the process. Any suggestions from anyone who has performed this task would be appreciated.