Replacing 12V 9W wedge base with LED

[PrincessoftheLake]

Our 1995 Hunter 40.5 has a few fixtures left that have the Perko 12v 9w wedge base bulbs that I would like to replace with LED's. SuperBright LED's says I can use any of their WLED mini wedge base models but I don't know which one to pick. These are the overhead lights in the fwd and aft heads and in the V-berth and the aft cabins.

http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fmini-wedge.html

Here is the link if anyone wants to take a look. I'd be grateful for any suggestions.

POTL.

 

[Rick D]

I replaced all mine. I'll look up my records and PM you.

 

[Rick D]

IF you are referring to the dome lights, the info from my order is:

Wedge Base Warm White
WLE D-xHP10-D

 

[PrincessoftheLake]

Rick-That's perfect, thanks. Do you think there is a big difference in the warm white and cool white as far as brightness goes? I don't understand the whole lumens deal. The other LED's I have are the cool white.

 

[Rick D]

For those, I'd go with the warm. You give up, as I recall, about 15% lumens, but the color is superior in those lamps and the light is at least as good as what was replaced. I mixed the others depending on where they were for other reasons (night sailing). Probably didn't need to. Warm white is fine.

 

[PrincessoftheLake]

For those, I'd go with the warm. You give up, as I recall, about 15% lumens, but the color is superior in those lamps and the light is at least as good as what was replaced. I mixed the others depending on where they were for other reasons (night sailing). Probably didn't need to. Warm white is fine.

Warm white it is then! Thanks for your help.

POTL